Gigabyte GA-7VA manual English, FPCI/AGP Frequency MHz, FDRAM Clock MHz, FCPU OverVoltage Control

English

FPCI/AGP Frequency (MHz)

8The values depend on CPU Host Frequency(Mhz) .

FDRAM Clock (MHz)

8Please set DRAM Clock according to your requirement.

If you use DDR200 DRAM module, please set “DRAM Clock(MHz)” to “100-DDR200”. If you use DDR333 DRAM module, please set “DRAM Clock(MHz)” to “166-DDR333”.

Incorrect using it may cause your system broken. For power End-User use only!

8Auto Set Memory frequency by DRAM SPD data. (Default value)

FCPU OverVoltage Control

Increase CPU voltage may get stable for Over_Clock. But it may damage to CPU when enable this feature.

8AutoSupply voltage as CPU reguired. (Default value)

8+5% / +7.5% / +10% Increase voltage range as user selected.

FAGP OverVoltage Control

Increase AGP voltage may get stable for Over_Clock. But it may damage to AGP Card when enable this feature.

8Auto	Supply voltage as AGP Card reguired. (Default value)
8+0.1V~+.03V	Set AGP voltage from 1.6V~1.8V.

FDIMM OverVoltage Control

Increase DRAM voltage may get stable for Over_Clock. But it may damage to DRAM module when enable this feature.

8Auto	Supply voltage as DRAM module reguired. (Default value)
8+0.1V~+.03V	Set DIMM voltage from 2.6V~2.8V.

GA-7VA Motherboard - 48 -