Gigabyte GA-7VA manual English, Pwrled, FPANEL 2x10 pins connector, Pin No, Mpd+

English

7) PWR_LED

PWR_LED is connect with the system power indicator to indicate whether the system is on/off. It will blink when the system enters suspend mode. If you use dual color LED, power LED will turn to another color.

	Pin No.	Definition
	1	MPD+
1	2	MPD-
	3	MPD-

8) F_PANEL (2x10 pins connector)

Please connect the power LED, PC peaker, reset switch and power switch etc of your chassis front panel to the F_PANEL connector according to the pin assignment above.

					Soft Power
					Connector
Message LED/Power/
Sleep LED
							PW-
	MSG-
	MSG+					PW+
			2	1			1
				1				1
		1
		HD+
IDE Hard Disk			HD-						NC
Active LED
					RES-

RES+

Speaker

Connector

SPK+ SPK-

1 20

19

Reset Switch

HD (IDE Hard Disk Active LED)	Pin 1: LED anode(+)
(Blue)	Pin 2: LED cathode(-)
SPK (Speaker Connector)	Pin 1: VCC(+)
(Amber)	Pin 2- Pin 3: NC
	Pin 4: Data(-)
RES (Reset Switch)	Open: Normal Operation
(Green)	Close: Reset Hardware System
PW (Soft Power Connector)	Open: Normal Operation
(Red)	Close: Power On/Off
MSG(Message LED/Power/	Pin 1: LED anode(+)
Sleep LED)(Yellow)	Pin 2: LED cathode(-)
NC(Purple)	NC

GA-7VA Motherboard - 22 -