Maytag 8101P641-60 Parts, Tools, Materials, The Following Parts Are Supplied With The Oven

Parts, Tools, Materials

THE FOLLOWING PARTS ARE SUPPLIED WITH THE OVEN:

NOTE: Depending on your ventilation requirements, you may not use all of these parts.

Damper/duct connector

(for roof venting or wall venting installation)

Not Actual Size (2 pieces must be assembled as shown)

One power cord clamp and

One dark-colored mounting screw (to hold the power cord)

Actual Size

One power cord clamp bushing - Actual Size (for the cord hole in a metal upper cabinet)

Four 1/4" x 2" lag screws - Actual Size (for wall stud holes)

Two 1/4" x 3" bolts - Actual Size (for securing to the upper cabinet)

Four spring toggle heads - Actual Size (for the toggle bolts)

Four 1/4" x 3" toggle bolts - Actual Size (for drywall holes)

Two tapping screws - Actual Size

(for attaching the damper duct connector)

One upper cabinet template- Not Actual Size

One rear wall template- Not Actual Size (3 pieces mounting plate only)

	12
4	F. CUT OUT FOR WALL
	VENTED ONLY
A.	B.

REAR WALL TEMPLATE

NOTE: You need to install at least two lag screws into a 2" x 4" stud and four anchor bolts into the wall. and the mounting area must meet the 150 lbs. weight requirement.

6