Ringer Controls – Page 23
Ringer Controls
Changing the Ringer Volume
While altering the volume, the phone rings.
To change the ringer volume:
1.Press PROGRAM and then 
RINGER.
2.Enter the phone's passcode (see "The Phone Passcode" on page 26).
3.Press 
VOLUME. The display shows a slider. Adjust this using the 
- keys on its left (softer) or right (louder).
4.Press 
DONE and then press PROGRAM twice to finish.
Changing the Ringer Sound
The ringer sound contains three tones. You can adjust the 'mix' of these to achieve your own distinctive ring. While doing this the phone rings.
To change the ringer sound:
1.Press PROGRAM and then 
RINGER.
2.Enter the phone's passcode (see "The Phone Passcode" on page 26).
3.Press 
SOUND. The display shows a slider. Adjust this using the 
- keys on its left and right.
4.To select another part of the sound to adjust, press 
TONE. This changes the slider to a different tone.
5.Press 
DONE and then press PROGRAM twice to finish.
Switching the Ringer On/Off
You can switch the ringer on or off for internal and/or external calls. This does not affect the information displayed.
For internal calls you can also select AUTO ANSWER to connect internal calls after giving just a single ring.
To switch the internal or external ring on/off:
1.Press PROGRAM and then 
RINGER.
2.Enter the phone's passcode (see "The Phone Passcode" on page 26).
3.Press 
SCROLL and then press 
EXTERNAL or 
INTERNAL. The display shows the current setting.
4.To change the ringer mode, press 
CHANGE to select ON, OFF or AUTO ANSWER (internal only).
5.Press 
DONE and then press PROGRAM twice to finish.
40DHB0002UKAG Issue 2a (13/11/2001) | IP Office - 2030 & 2050 Phone |
