Avaya 2050 Setting Up a DSS Key, Using DSS Keys, Page 18 - Contents, To make internal calls

Page 18 – Contents

DSS Keys

Setting Up a DSS Key

The 2030 and 2050 phones have eight DSS keys along their right-hand edge. Each of these keys can store an extension number (or group number for paging). They then allow you to dial those numbers in a single key press.

You can also use DSS keys to dial your personal speed dial numbers (see page 7).

To set a DSS/BLF key directory number:

1.Press PROGRAM and then the DSS key to use.

2.Enter the phone's passcode (see "The Phone Passcode" on page 26).

3.The display shows the current stored number (if set).

4.Press CANCEL and dial the number to store.

5.Select another DSS key and enter the required details

6.Press DONE then PROGRAM to finish.

Using DSS Keys

Once setup, you can use the DSS key for the following actions. You can also use DSS keys to dial personal speed dial numbers (see "Storing Personal Speed Dials" on page 7).

To make internal calls:

Press the DSS key storing the extension or group number.

To pickup calls:

Press the DSS key storing the ringing number (this will be giving a fast red flashing for an extension or fast green flash for a group), the call details are shown. Either press SPEAKER and then ANSWER RELEASE to answer the call or just ANSWER RELEASE to cancel the pickup attempt.

To make a page call:

Press PAGE and then the DSS key storing the extension or group number. See "Making a Page Call" on page 5 for more information.

IP Office - 2030 & 2050 Phone 40DHB0002UKAG Issue 2a (13/11/2001)