Gigabyte GA-K8VT800 user manual Clrcmos Clear Cmos, Battery

English

16)CLR_CMOS (Clear CMOS)

You may clear the CMOS data to its default values by this jumper. To clear CMOS, temporarily short 1-2 pin. Default doesn't include the "Shunter" to prevent from improper use this jumper.

1

Open: Normal

Short: Clear CMOS

1

17) BATTERY

Danger of explosion if battery is incorrectly replaced.

Replace only with the same or equivalent type recommended by the manufacturer.

Dispose of used batteries according to the manufacturer's instructions.

If you want to erase CMOS...

1.Turn OFF the computer and unplug the power cord.

2.Take out the battery gently and put it aside for about 10 minutes. (Or you can use a metal object to connect the positive and nega- tive pins in the battery holder to makethem short for one minute.)

3.Re-install the battery.

4.Plug the power cord and turn ON the computer.

GA-K8VT800 Motherboard - 26 -