4-7-3 Refer to the installation order illustrated in the left figure and secure the 3.5” floppy disc drive by controlling the latch. (reverse steps for disassembly)
4-7-4 Installation completed.
4-8Installation of Built-in HDD (Hard Disc Drive)
The 3D AURORA provides built-in bays to accommodate up to 5 hard disc drives (after removal of the tool enclosure). The built-in HDD requires securing runners, which can be found in the black tool enclosure.
Required tool: Securing runners x 10 in the tool enclosure and power extension cables x 2.
4-8-1 Use the runners installed on both sides of the HDD evenly and slide the HDD into the hard disk drive bay.
4-8-2 For installation of the fourth and fifth HDDs, loosen the tool enclosure, and then install the HDD in accordance with Step 4-8-1.
4-8-3 In case the length of power cable is not sufficient for installation of the bottom HDD, it is possible to use the power extension cable inside the tool enclosure, depending on the HDD with 4-pin or SATA power cable.
14
