4-6Installation of 5.25” Front Device Bay
The installation of 5.25” CD-ROM is also intended for installation of general 5.25” front device bay. Required tool: None
4-6-1 Open the front panel, remove the 5.25” plastic drive rail and internal metal panel.
4-6-2 Slide the 5.25” CD-ROM into the drive.
4-6-3 Refer to the installation order illustrated in the left figure and secure the 5.25” CD-ROM by controlling the latch (reverse steps for disassembly).
4-6-4 Installation completed.
4-7Installation of 3.5” Front Device Bay
The installation of 3.5” floppy disc drive intended for installation of general 3.5” front device bay Required tool: None
4-7-1 Same as Step 4-6-1.
4-7-2 Slide the 3.5” floppy disc drive into the drive bay.
