Gigabyte M1405 user manual How to Connect an Hdmi Display, Ethernet LAN Connection

6.3 How to Connect an HDMI Display

Connect an HDMI Display

To insert the cable, simply line it up with the HDMI port on the M1405 unit and press it into the port securely. It will click lightly into place when it is inserted properly. Use the operating systems display properties to then get an image on the HDMI Output port. Depending on your configuration the HDMI port can also carry a sound signal.

Disconnect an HDMI Display

To remove the cable simply grab the head of the cable and gently pull out of the M1405, ensuring that the port is no longer active with a display output. DO NOT pull by the cable itself is this can damage the HDMI cable or the cables connector head as well as the HDMI port.

M1405 SERIES USER’S MANUAL

6.4 Ethernet LAN Connection

The M1405 features an RJ45 Ethernet port with an integrated LAN controller capable of operational speeds of 10Mbps, 100Mbps or Gigabit (1000Mbps), depending on configuration.

Ethernet LAN Connection

The built-in LAN controller defaults to Auto Discovery when any LAN cable is connected and will be able to operate on a Peer 2 Peer basis.

The connection speed will also be determined by the cable used and the network hardware that you connect to.

For Gigabit (1000Base-T) a CAT5E (Category 5E) Cable is required For 100Mbps (100BASE-T) a CAT5 (Category 5) Cable is required

To connect to a LAN, simply take the cable and align it, contacts facing down, and push it into the RJ45 LAN port until it clicks into place.

To disconnect, simply push the clip arm down and pull the cable out of the port to remove it.

English

33