Cleaning
Glass parts
FACIA PANEL & DOOR PANELS
Use a mild cream cleaner.
Rinse thoroughly and dry with a soft cloth. Do not use abrasive cleaners or polishes.
To remove the glass panel for cleaning, open the door to the door stop position (about 30˚ open), hold the top and bottom edges of the panel and slide out. Note that if the door is opened fully when removing the inner door glass panel, the door may spring shut.
30°
Door stop position
Important: if the inner door glass panel is removed for cleaning, it must be replaced the right way up as shown, and pushed fully in to the stop position.
slide in this way up
Painted, plastic and metal finish parts (if fitted)
OVEN DOOR FRAME & HANDLE, METAL FASCIA PANEL, CONTROL KNOBS
Only use a clean cloth wrung out in hot soapy water.
22
