Technical Data
Data badge
Lower part of front frame and the rear panel of the appliance
Pressure setting
Natural Gas G20 @ 20 mbar (8”wg)
Gas category
Natural gas - I2H
Appliance class
Class 3 double oven and grill
Ignition
Mains operated
Electrical supply
220 - 240V ~ 50Hz
Main Oven
Bray type burner, sheet steel body, stainless steel flame strip
Nominal Rate Qn | 2.5kW |
Injector | 115 |
Spark gap | 3 - 4mm |
Thermostat | 50 |
Oven injector - If the injector is removed or replaced for and reason, it is mandatory to apply Hylomar PL32 or Plasticol X10 sparingly to the thread prior to (re)fitting.
Top oven |
|
Nominal rate Qn | 1.8kW |
Injector | Amal 130 |
Spark gap | 3 - 4mm |
Thermostat bypass | 50 |
Oven injector - If the injector is removed or replaced for any reason, it is mandatory to apply Hylomar PL32 or Plasticol X10 sparingly to the thread prior to (re)fitting.
Maximum heat input | ∑ |
∑ Qn 4.75kW |
|
Countries of destination |
|
GB - Great Britain |
|
IE - Ireland |
|
31
