Unpacking

Due to modern mass production techniques, it is unlikely that your GMC Power Tool is faulty or that a part is missing. If you find anything wrong, do not operate the tool until the parts have been replaced or the fault has been rectified. Failure to do so could result in serious personal injury.

Assembly

The handle of the AC40L model must be fitted in the following manner:

1.Loosen the grub screw in each of the handle fixing holes.

2.Insert the two ends of the handle into the fixing holes.

3.Tighten the grub screws to secure the handle in place.

Wheels

Fit the wheels as follows:

•for the 24 litre compressor, push each wheel firmly onto the axle until it "snaps" into position.

•for the 40 litre compressor, first insert an axle pin through the wheel and then through the hole in the bracket under the tank. Next, fit the spacer on the axle pin followed by the flat washer, split washer and nut. Tighten the nut. Repeat for the second wheel.

Rubber feet

Fit the two rubber feet on the bracket on the front underside of the tank using the screws, washers and nuts supplied.

Warning. The air compressor must be filled with oil before first use.

To prevent possible spillage of oil during transport, the compressor oil is supplied in a separate container. It must be added to the compressor before turning the compressor on. Failure to add the oil will cause non-repairable damage to the compressor and will void the warranty.

1.Remove the plastic oil filling cap (15) located on the top of the crank case of the compressor housing.

2.Use the oil supplied to fill the crank case until the oil level as seen in the oil level glass (17) is up to the mid point of the red circle.

3.Replace the oil filling cap (15). Ensure the cap is fully fitted and firmly in position.

10

Page 9 Page 11
Page 10
Image 10
Global Machinery Company AC40L instruction manual Unpacking, Assembly
Page 9 Page 11

AC40L specifications

Global Machinery Company's AC40L is a cutting-edge piece of equipment designed to meet the diverse needs of industries seeking efficiency, versatility, and reliability in their machinery. This model stands out in the realm of construction and heavy-duty equipment due to its advanced engineering and robust performance capabilities.

One of the primary features of the AC40L is its powerful engine. Designed with energy efficiency in mind, the engine delivers substantial torque, allowing it to handle a wide range of tasks from loading and unloading materials to maneuvering on challenging terrains. This robust powertrain not only enhances productivity but also minimizes operational downtime, making the AC40L a trusted choice for continuous work environments.

The AC40L is equipped with an advanced hydraulic system that allows for precise control during operations. This technology ensures that the machinery can perform intricate tasks with ease, significantly reducing the risk of errors or accidents. The system features a quick-attach interface, enabling operators to switch implements swiftly, adapting to various job requirements without hassle.

Ergonomics is a key consideration in the design of the AC40L. The operator cab is spacious and fitted with intuitive controls, allowing for comfortable and efficient operation. Enhanced visibility from the cab ensures that operators can always maintain awareness of their surroundings, which is critical in busy job sites. Additionally, the inclusion of climate control features ensures a comfortable working environment, effectively reducing operator fatigue.

Durability is another notable characteristic of the AC40L. Built with high-grade materials, the machinery is designed to withstand the rigorous demands of heavy-duty operations. Components are engineered for longevity, reducing maintenance needs and prolonging the lifespan of the equipment.

In terms of safety, Global Machinery Company has integrated advanced safety features, including rollover protection and stability control, which enhance operator confidence while working in potentially hazardous conditions.

Overall, the Global Machinery Company AC40L stands as a testament to innovative engineering, bringing together power, efficiency, and safety to meet the expectations of modern industries. This machine is not only an investment in productivity but also a commitment to the quality and reliability that Global Machinery Company is known for. Whether on a construction site, in landscaping, or involved in other heavy-duty applications, the AC40L proves to be an indispensable ally in achieving operational goals.
Top Page Image Contents