Toshiba ProT1!0, T110 manual Top Cover Assembly, Removing the top cover assembly

Chapter 4 Replacement Procedures

4.9 Top Cover Assembly

Removing the top cover assembly

The following describes the procedure for removing the top cover assembly (See Figure 4-9-

1to 4-9-4).

1.Turn over the computer.

2.Remove the following screws securing the cover assembly from the back and bottom of computer.

∙	M2.0×2F	FLAT BIND screw	x3
∙	M2.0×3F	FLAT BIND screw	x2
∙	M2.0×4F	FLAT BIND screw	x9
∙	M2.0×6F	FLAT BIND screw	x3
∙	M2.5×8F	FLAT BIND screw	x2

Figure 4-9-1 Remove the screws (back)

3. Disassemble KB Holder and KB (See Figure 4-5-1 to Figure 4-5-2)

Satellite T110 / Satellite Pro T110 / PORTEGE T110Maintenance Manual (960-Q08) 31