Removing a Bluetooth module

Chapter 4 Replacement Procedures

The following describes the procedure for removing a Bluetooth module (See Figure 4-6-2).

1.Disconnect the Bluetooth cable f from the connector on the system board.

2.Remove the Bluetooth module from the hook on the Base Assembly.

Figure 4-6-2 Remove a Bluetooth Module

The following describes the procedure for installing a Bluetooth module.

1.Connect the Bluetooth cable to the connector on the system board.

2.Insert the Bluetooth module into the hook on the Base Assembly.


Satellite T110 / Satellite Pro T110 / PORTEGE T110Maintenance Manual (960-Q08)	21