Chapter 4 Replacement Procedures
Installing the keyboard
The following describes the procedure for installing the keyboard.
1.Connect the keyboard flexible cable to the connector on the system board.
2.Slide and set the keyboard.
3.Install the K/B holder by pressing it from the topside.
4.Upside down the computer and secure keyboard with the following screw.
∙ M2.5×8.0F | Flat BIND screw | x2 |
5. Secure the KB holder with the following screw. |
| |
M2.0×3.0F | Flat BIND screw | x2 |
|
|
|
Satellite T110 / Satellite Pro T110 / PORTEGE T110Maintenance Manual | 19 | |
