Toshiba ProT1!0, T110 4.3 HDD

Chapter 4 Replacement Procedures
4.3 HDD
Removing a HDD-H9.5mm
The following describes the procedure for removing the HDD (See Figure 4-3-1 to 4-3-3).
CAUTION: Take care not to press on the top or bottom of a HDD. Pressure may cause
data loss or damage to the device.
1. Turn the computer upside down.
2. Remove the following screws with a T6-bit TORX securing HDD slot cover and
remove HDD slot cover.
 M2.04.0U FPH(T6) screw x2
3. Remove the following screws securing the HDD assembly.
 M2.04.0F FLAT BIND screw x4
4. Disconnect the HDD assembly from the connector on the HDD cable
MAIN HDD
Figure 4-3-1 Turn the computer upside down
Satellite T110 / Satellite Pro T110 / PORTEGE T110Maintenance Manual (960-Q08) 11