
Chapter 4 Replacement Procedures
4.13 CPU heat sink
Removing the CPU heat sink
The following describes the procedure for removing the CPU heat sink (See Figure
1.Disconnect the Heat sink cable from the connector on the system board
2.Loose the following screws securing the heat sink holder along 1 to 3.
∙ M2.0×3.0F | FLAT BIND screw | x3 |
NOTE: When removing the heat sink holder, be sure to remove the screws in the reverse order of the number marked on the holder.
Figure 4-13-1 Remove the CPU heat sink
|
|
|
Satellite T110 / Satellite Pro T110 / PORTEGE T110 Maintenance Manual | 45 |