Toshiba T110, ProT1!0 manual Screw Tightening Torque

Chapter 4 Replacement Procedures

Screw Tightening Torque

Use the following torque when tightening screws.

CAUTION: Over-tightening may damage screws or parts. Under-tightening may allow screws to loosen (and possibly fall out) causing a short circuit or other damage.

NOTE: To tighten screws quickly and accurately, an electric screwdriver is recommended.

∙ M2 (2mm) 0.167 N·m (1.7 kgf·cm)

∙M2.5 (2.5mm) 0.245 N·m(2.5 kgf·cm)

∙ M3.0 (3mm) 0.245 N･m (2.5 kgf･cm)

NOTE: To prevent damage to THIN HEAD screws, press along the axis of the screwdriver while turning the screw. This is because the contact area between the screw and driver is less than for a pan head screw (standard pan-shaped screw head).

Satellite T110 / Satellite Pro T110 / PORTEGE T110Maintenance Manual (960-Q08) 6