GN Netcom ELT 560 owner manual Connect the expansion handsets charger

note

•Use only the supplied AD-0005 AC adapter. Do not use any other AC adapter.

•Your phone maybe compatible with other Uniden 5.8Ghz Digital Expandable Systems. Look for the technology icon on our boxes or visit our website for a list of compatible models.

w w w . u n i d e n . c o m

Connect the expansion handset's charger

The handset is powered by a rechargeable battery pack. The battery recharges automatically when the handset is placed in the charger.

1) Connect the AC adapter to the DC IN 9V jack and to a standard 120V AC wall outlet.

2) Set the charger on a desk or tabletop, and place the handset in the charger with the sub-LCD screen facing forward.

3) Make sure that the charge LED illuminates.

If the LED does not illuminate, check to see that the AC adapter is plugged in and the handset makes good contact with the charger charging contacts.

4)Charge the handset battery pack for at least 10 hours before using your new expansion handset for the first time.

Register the Handset

Any handsets supplied with the phone are registered to the base by the factory. Pre-registered handsets display a handset ID number. Handsets that have not been

registered display MUST place the handset in base to register! Models may vary, refer to Owners Manual for help. in the LCD, and Handset must be registered in

the sub LCD. When you register an extra handset to the base, the handset ID will be assigned. Only one handset can be registered at a time.

Expanding Your Phone [ 1 2 ]

Expanding Your Phone