Multi-Handset Features
The features in this section require a minimum of two handsets to operate. To add additional handsets to your system, see "Expanding Your Phone" on page 11.
note
Using DirectLink Mode
In DirectLink Mode, a pair of handsets can function as
To enter DirectLink mode, Select Direct Link option in the main menu. And then press the ENTER soft key. Direct Link
Mode complete. appears.
To make a DirectLink call, press the DirectLink soft key. Select the handset you want to call. To cancel the call, Press end. To
answer a DirectLink call, Press talk/flash or . Press end when you want to hang up.
To exit DirectLink mode and be able to receive normal phone calls again, press the CANCEL soft key, and then press the OK soft key.
&KTGEV.KPM
5'.'%6
•If the party is out of
range, Unavailable
appears in the display, and the operation will be canceled.
•While a pair of handsets are in Intercom DirectLink Monitor, they cannot be used to make or receive calls. Other handsets can still make and receive calls.
[ 5 5 ] | w w w . u n i d e n . c o m |