15
Basic TV Connections
����������������
��
����������������������������
��
�����
������������������
��
If your TV has standard RF or AV inputs:
1 Connect the supplied RF cable from the DVD Recorder+VCR to your TV as shown.
OR
Connect the supplied audio/video cables from the DVD Recorder+VCR to your TV
as shown.
2 Press POWER to turn on the DVD Recorder+VCR.
3 Turn on your TV and set it to channel 3 or 4 (for the RF connection) or the appropri-
ate Video input (for the AV connection).
4 Continue with Chapter 3 to set up your DVD Recorder+VCR.
NOTE:
• If your TV has S-Video or Component Video inputs, see page 16.
• To change the RF Out channel to 3 or 4, first turn off the unit. Then press and hold
both of the CH buttons on the front panel for 5 seconds. The selected output
channel appears on the front panel display. Tune your TV to this channel.
2 - Connections