26 DVD Recorder+VCR User’s Guide
Audio Settings

Dolby/DTS/MPEG

Sets the format of the digital audio signal
from the Coaxial and Optical jacks.
1 Press SETUP.
2 Select “AUDIO” > “Dolby Digital”, “DTS”,
or “MPEG”.
3 Choose from the following options:
PCM – Select if the unit is connected
to a 2-channel digital stereo amplifier.
Bitstream - Select if the unit is con-
nected to a 5.1 channel amplifier/re-
ceiver with a built-in Dolby Digital,
DTS, or MPEG decoder.

Sampling Frequency

Sets the digital output frequency to
match the capabilities of your amplifier.
1 Press SETUP.
2 Select “AUDIO” > “Sampling Freq”.
3 Choose “48KHz ” or “96KHz”.
• Only select 96kHz if your amplifier is
capable of handling 96 kHz signals

Dynamic Range Control

Compresses the dynamic range (DRC)
of the audio output—the difference
between the loudest and quietest
passages—during DVD playback.
1 Press SETUP.
2 Select “AUDIO” > “DRC”.
3 Turn DRC on or off.

Surround Mode

Sets the surround mode.
1 Press SETUP.
2 Select “AUDIO” > “Surround”.
3 Choose “Stereo”, “3D (Virtual Sur-
round)”, “Dolby Digital”, or “DTS” to
match the capabilities of your audio
system.
Dolby Digital
DTS
MPEG
Sampling Freq.
DRC
Surround
Bitstream
PCM
Prev
Dolby Digital
DTS
MPEG
Sampling Freq.
DRC
Surround
96KHz
48KHz
Prev
Dolby Digital
DTS
MPEG
Sampling Freq.
DRC
Surround ON
OFF
Prev
Dolby Digital
DTS
MPEG
Sampling Freq.
DRC
Surround
3D
Stereo
DTS
Dolby Digital
Prev