24 DVD Recorder+VCR User’s Guide
General Settings (continued)
To Cancel Progressive Scan
If you enable Progressive Scan
accidentally, the picture will be distorted.
To reset the unit:
1 Remove any disc or tape in the unit.
2 Press and hold the STOP button for
5 seconds.
Playback Control (PBC)
PBC stands for Playback Control and
refers to special menus and navigation
features available on some Video CDs.
1 Press SETUP.
2 Select “GENERAL” > “PBC” .
3 Set PBC to “ON” (Video CDs are played
according to the PBC, if available), or
“OFF” ( Video CDs are played the same
way as Audio CDs).
Power Save Mode
Sets the DVD Recorder+VCR to an
economical power saving mode.
1 Press SETUP.
2 Select “GENERAL” > “Power Save
Mode” .
3 Turn Power Save Mode on or
off.
Factory Settings
Restores the DVD Recorder+VCR to its
original factory settings.
1 Press SETUP.
2 Select “GENERAL” > “Factory Set” >
“SET” .
3 Select “Yes” and press ENTER.
• All menu settings will be restored to
their factory defaults.
• Some settings cannot be reset, in-
cluding the Parental Control, Pass-
word, and Area Code settings.
ON
OFF
Prev. Select
Tuning Band
CH. Add/Del
Clock Set
Display Mode
TV Aspect
Progressive Scan
PBC
Factory Set
Power Save Mode
Set
Display Mode
TV Aspect
Progressive Scan
PBC
No
It initializes the system status.
Continue?
Yes
Tuning Band
CH. Add/Del
Clock Set
Factory Set
Power Save Mode
Prev. Select
ON
OFF
Tuning Band
CH. Add/Del
Clock Set
Display Mode
TV Aspect
Progressive Scan
PBC
Factory Set
Power Save Mode
Prev. Select