41

Recording from TV

To record a TV show to a DVD or VHS
tape:
1 Turn on the DVD Recorder+VCR and
load a recordable disc or tape.
• Make sure your TV input is set to
view the DVD Recorder+VCR.
2 Press DVD to control the DVD deck, or
VCR to control the VCR deck.
3 Press REC MODE to set the
desired recording quality:
DVD - XP (1 hr/disc), SP (2 hrs/disc),
LP (4 hrs/disc), EP (6 hrs/disc)
VCR (T-120 tape) - SP (2 hrs/tape),
SLP (6 hrs/tape)
4 Press CH/ to select the TV chan-
nel you wish to record.
5 Press AUDIO to set the audio channel
to record (Stereo, Mono, or SAP).
6 Press REC once.
• Recording will start.
• Recording continues until
you press STOP or the disc is full.
7 Options during recording:
• Press PAUSE/STEPto pause re-
cording.
• While paused, you can change
channels or inputs.
• Press PAUSE/STEP or REC to
resume recording.
• Press DISPLAY to check the progress
of the recording.
• To record for a fixed length of time,
see “One Touch Recording” at right.

One-Touch Recording

To add recording time in fixed
increments:
• Press REC repeatedly to set the
length of the recording:
DVD - Each press adds 10 minutes to
the recording time.
VCR - Each press adds 30 minutes to
the recording time (up to 540 min-
utes).
• To cancel One-Touch Recording, press
PAUSE/STEP.
• The DVD Recorder+VCR will power
off automatically when the recording
time has elapsed (unless you are us-
ing the non-recording deck).

Watching and Recording

• To record to DVD while watching
a tape, press DVD and then press
REC.
• To record to VCR while watching a
DVD, press VCR and then press REC.
• To record one show while watching
another, press TV/VCR and select the
desired channel on your TV (RF con-
nection only).
Basic Recording
NOTE:
• The maximum numbers of titles per DVD-R/RW is 99 (per DVD+R/RW is 49).
• If the DVD Recorder+VCR is powered off during DVD recording, the recording will not
be saved.
VCR
120min Rec.
DVD
0:09:05
00:17:32
40min Rec.
MONO
Input : Ch. 6
STEREO
Input : Ch. 6
2H 01M Free
SP
SP
4 - Operations