22 DVD Recorder+VCR User’s Guide
General Settings

Auto Channel Search

Specifies whether the DVD Recorder+VCR
is connected to an antenna or cable TV
source, then automatically searches for all
available TV stations.
1 Press SETUP.
2 Select “GENERAL” > “Tuning Band” .
3 Choose from the following:
TV - Select if you have an antenna.
CATV - Select if you have cable TV.
4 Select “Start” .
• The DVD Recorder+VCR searches
for all available stations. This may
take several minutes to complete.

Adding/Deleting Channels

Allows you to add or delete channels.
1 Press SETUP.
2 Select “GENERAL” > “CH. Add/Del”
>”Edit”.
3 Add or delete channels:
• Use CH or 0-9 to select the
desired channel, then press .
• Press ENTER to add or delete the
selected channel.

Auto Clock Set

Sets the clock automatically whenever
the DVD Recorder+VCR is turned off.
1 Press SETUP.
2 Select “GENERAL” > “Clock Set” >
”Auto” .
3 Choose from the following:
Time Zone - Set your local time zone
to Auto (default), Hawaii, Alaska, Pa-
cific, Mountain Central, or Eastern.
Daylight Savings - Set Daylight Sav-
ing to Auto (default), OFF, or ON.
Tuning Band
CH. Add/Del
Clock Set
Display Mode
TV Aspect
Progressive Scan
PBC
Factory Set
TV
CATV
Prev
Power Save Mode
START
Ch. 02 Delete
Add
0-9 Input Return
Time
Zone
Manual
Auto
Auto
Daylight
Savings
Auto
Prev Move Select
Tuning Band
CH. Add/Del
Clock Set
Display Mode
TV Aspect
Progressive Scan
PBC
Factory Set
Power Save Mode
NOTE:
• If you receive channels from a
cable box or satellite receiver,
there is no need to set the Tuning
Band or search for channels.