Gold's Gym 880, GGEL68108.0 manual Assembly, Wrench A rubber mallet

ASSEMBLY

To hire an authorized service technician to assemble the elliptical exerciser, call 1-800-445-2480. Assembly requires two persons. Place all parts of the elliptical exerciser in a cleared area and remove the packing materials. Do not dispose of the packing materials until assembly is completed.

In addition to the included tool(s), assembly requires a Phillips screwdriver			, an adjustable
wrench	, and a rubber mallet	.

As you assemble the elliptical exerciser, use the drawings below to identify small parts. The number in parenthe- ses below each drawing is the key number of the part, from the PART LIST near the end of this manual. The number following the parentheses is the quantity needed for assembly. Note: Some small parts may have been preassembled. If a part is not in the hardware kit, check to see if it has been preassembled.

M6 Split Washer		M8 Split	M8.5 x 16mm x	M10 x 25mm	M10 Curved		Link Arm
			1.5mm Washer
(102)–8	Washer (101)–4		(103)–6	Washer (87)–2	Washer (99)–4		Spacer (74)–4
Wave Washer		M4 x 16mm	M6 x 35mm Patch		M6 x 62mm
	Screw (97)–16		Screw (109)–4		Patch Screw (108)–4
(100)–2
M8 x 15mm Patch		M8 x 20mm Patch		M8 x 25mm Patch		M10 x 20mm Patch
Screw (106)–10		Screw (107)–4		Screw (110)–2			Screw (111)–2
			M10 x 93mm Patch Screw (82)–4

5