5.Insert the Roller (38) on the Left Pedal Arm (32) and the Roller on the Right Pedal Arm (33) into the sides of the Ramp (5).
Attach the Rear Ramp Cover (7) to the Ramp (5) with two M4 x 16mm Screws (97). See the inset drawing. Lift the Pedal Arm Latch (41) on the Left Pedal Arm (32), and set the end of the Left Pedal Arm on the left Crank Bushing Sleeve (54). Release the Pedal Arm Latch, and make sure that the Left Pedal Arm is securely connected to the Crank Bushing Sleeve.
Connect the Right Pedal Arm (not shown) to the right Crank Bushing Sleeve (not shown) in the same way.
5 | 97 | 7 |
| ||
| 33 |
|
| 5 | 38 |
| 32 |
|
32 |
| |
41 | 54 |
|
8
