13.Apply grease in the locations shown and attach the Left Butterfly Bracket (28) to the Butterfly Frame (5) with an M10 x 80mm Bolt (84) and an M10 Nylon Locknut (77).
Repeat this step for the Right Butterfly Bracket (29).
Tighten the Nylon Locknuts (77, 78, 107) used in steps 2 through 13.
14.Attach a Butterfly Handle (27) to the Left Butterfly Arm (25) with an M10 x 65mm Button Bolt (106), two M10 Washers (80), two 13mm Steel Spacers (109), and an M10 Nylon Locknut (77).
Secure the Butterfly Handle (27) with an M10 x 82mm Button Screw (92) and an M10 Large Washer (105).
Repeat this step for the Right Butterfly Arm and Butterfly Handle (26, 27).
15.Apply grease in the locations shown and attach the Right Butterfly Arm (26) to the Right Butterfly Bracket (29) with an M10 x 75mm Bolt (82) and an M10 Nylon Locknut (77). Press a Bolt Cap
(44) onto the end of the Bolt. Do not overtighten the Bolt; the Butterfly Arm must be able to pivot freely.
Repeat this step for the Left Butterfly Arm (25).
13 |
|
| |
| 84 |
| |
| Grease |
| |
29 |
|
| |
5 |
|
| |
77 | 28 |
| |
|
| ||
14 |
|
| |
| 25 | 77 | |
|
| ||
27 |
| 80 | |
| 109 | 109 | |
26 | 27 | ||
80 | |||
|
| ||
| 106 |
| |
| 105 |
| |
| 92 |
| |
15 |
|
| |
| 77 |
| |
| Grease |
| |
26 |
|
| |
| 82 |
| |
44 | 29 |
| |
|
| ||
| 25 |
|
13
