40.Attach the Leg Lever Cable (51) to the Upright (2) with the M10 x 120mm Bolt (115), an M10 Washer (80), a 7mm Spacer (111), and an M10 Nylon Locknut (77). Make sure that the flat edge of the Cable is against the Spacer.
Seat Assembly
41.Attach the Right Butterfly Pad (35) to the Right Butterfly Arm (26) with two M6 x 65mm Button Screws (91) and two M6 Washers (114).
Repeat this step for the Left Butterfly Pad (34).
42.Attach the Backrest (31) to the Backrest Frame
(7) with two M6 x 20mm Screws (88), an M6 x 38mm Screw (89), and an M6 Washer (114).
Insert the Backrest Frame (7) into the Upright (2) and tighten the Backrest Adjustment Knob (53) into the Upright. Make sure that the Adjustment
Knob passes through one of the holes in the Backrest Frame.
40 |
|
2 |
|
115 |
|
| 80 |
| 111 |
51 | 77 |
Flat Edge |
|
41 |
|
26 |
|
114 |
|
35 |
|
91 |
|
34 |
|
42 |
|
88 |
|
7 |
|
31 |
|
2 | 53 |
89 |
|
114 |
|
22
