Gold's Gym GGSY3066.1 manual Cable Assembly

Cable Assembly

19.See the CABLE DIAGRAM on page 28 to identify the cables as you assemble them.

Identify the Butterfly Cable (50). Grease an

M8 x 22mm Shoulder Bolt (90). Attach the Cable to the Left Butterfly Bracket (28) with the Shoulder Bolt and an M8 Nylon Locknut (78). Make sure that the flat edge of the Cable is against the Butterfly Arm. Do not overtighten the Shoulder Bolt; the Cable must pivot freely.

20.Wrap the Butterfly Cable (50) over a “V”-pulley (47). Attach the “V”-pulley, a Long Cable Trap (57), an M10 Washer (80), and two Guards (54) to the Upright (2) with an M10 x 60mm Bolt (79) and an M10 Nylon Locknut (77).

21.Wrap the Butterfly Cable (50) under a 90mm Pulley (48). Attach the Pulley and two Half Guards (55) to the Double “U”-bracket (61) with an M10 x 45mm Bolt (86) and an M10 Nylon Locknut (77). Make sure that the Half Guards are oriented as shown.

19
90	Grease
50	28
	78
Flat Edge
20
	77
2	54 50
	57
	54
	79
	80
	47
21
	50
48	77
86	55
55	61

15