Gold's Gym GGSY3066.1 manual Lever Cable 51 is under the Pulley

31.Attach a 90mm Pulley (48) to the Front Leg (10) with an M10 x 65mm Bolt (85), two M10 Washers (80), two 13mm Steel Spacers (109), and an M10 Nylon Locknut (77). Make sure that the Leg

Lever Cable (51) is under the Pulley.

32.Route the Leg Lever Cable (51) under the 89.5mm Spacer (59), through the Upright (2), and under the indicated rod in the Base (1). Wrap the Leg Lever Cable around a 90mm Pulley (48). Attach the Pulley to the Base with an M10 x 45mm Bolt (86), two Half Guards (55), and an M10 Nylon Locknut (77).

33.Wrap the Leg Lever Cable (51) over a 90mm Pulley (48). Attach the Pulley, a Cable Trap (56), and two Half Guards (55) to the second hole from the bottom of the Pulley Plates (60) with an M10 x 50mm Bolt (97) and an M10 Nylon Locknut

(77). Make sure that the Cable Trap and the

Half Guards are oriented as shown.

31
10
85
80
109
48
51	109
			80
			77
32
86	48		51
55
59
	1	55	77
Rod
33
60		55
77
		97
55
56		48
51

19