43.Attach the Seat (32) to the Seat Frame (8) with two M6 x 20mm Screws (88), an M6 x 38mm Screw (89), and an M6 Washer (114).
Insert the Seat Frame (8) into the Frame (9). Tighten the Seat Adjustment Knob (52) into the Frame and the Seat Frame. Make sure that the
Adjustment Knob passes through one of the holes in the Seat Frame.
44.Insert a Pad Tube (13) into the indicated hole in the Front Leg (10). Slide a Foam Pad (36) onto each end of the Pad Tube.
Press a Pad Cap (37) into an end of each Foam Pad (36).
Repeat this step for the other Pad Tube (13) and the Leg Lever (12). Note: Lift the Leg Lever Cable (51) when inserting a Pad Tube into the hole in the bottom of the Leg Lever.
45.Attach the Butterfly Cover (30) to the Butterfly Bracket (5) with four M4 x 12mm
43 |
|
|
32 |
|
|
|
| 114 |
8 |
| 89 |
|
| |
88 |
| |
| 9 | 52 |
44 |
|
|
37 |
| 10 |
|
| |
36 |
|
|
12 |
|
|
|
| 13 |
51 |
|
|
13 |
| 36 |
|
| |
|
| 37 |
45 |
|
|
| 102 |
|
30 | 5 |
|
102 |
| |
23
