1.5LOCATIONS OF CONTROLS 1.5.1 CONTROLS
TEMPERATURE SETTING
• This button can automatically control the temperature
of the room. The temperature can be set within a range of 60° F(16° C) to 86° F(30° C) by 1° F(1° C).
Select the lower number for lower temperature of the room.
ENERGY SAVER
The fan stops when the compressor stops cooling.
• Approximately every 3 minutes the fan will turn on and check the room air to determine if cooling is needed.
FAN/COOL/DRY
• Everytime you push this button, it will toggle between COOL, FAN and DRY.
ON/OFF TIMER
Dry Fan
Cool
- STOPPING OPERATION
•Everytime you push this button, when the unit is operating, timer is set as follows.
(1Hour 
2Hours 
3Hours 
4Hours
5Hours
6Hours 
7Hours 
8Hours 
9Hours 
10Hours 
11Hours 
12Hours 
Cancel)
•The Setting Temperature will be raised by 2° F(1° C) 30min. later and by 2° F(1° C) after another 30 min.
- STARTING OPERATION
•Everytime you push this button, when the unit is not operating, timer is set as follow.
(1Hour 
2Hours 
3Hours 
4Hours
5Hours
6Hours 
7Hours
8Hours 
9Hours 
10Hours 
11Hours 
12Hours 
Cancel)
POWER
•To turn the unit ON, push the button. To turn the unit OFF, push the button again.
•This button takes priority over any other buttons.
•When you first turn it on, the unit is on the High cool mode and the temp. at 72° F(22° C).
FAN SPEED
•Everytime you push this button it is set as follows. {High(F2) 
Low(F1) 
High(F2)...}.
