Goodman Mfg ADPF, ATUF, ASPF, ARUF installation manual Start-Up Procedure, Regular Maintenance

thermostat as shown in Figures 10 and 11.

Goodman® part number CHT18-60 is a single-stage cool and single-stage heat thermostat.

Goodman® part number HPT18-60 is a single-stage cool, two-stage heat pump thermostat. The first stage is heat pump heating and the second stage is optional electric heat.

If additional features are desired, such as digital or program- mable capabilities, these thermostats are commercially avail- able. Follow the thermostat manufacturer’s instruction for in- stallation.

•Return and supply ducts are sealed.

•Unit is elevated when installed in a garage or where flammable vapors may be present.

•Unit is protected from vehicular or other physical dam- age.

•Return air is not obtained from any areas where there may be objectionable odors, flammable vapors or prod- ucts of combustion such as carbon monoxide (CO), which may cause serious personal injury or death.

Start-Up Procedure

•Prior to start-up, ensure that all electrical connections are properly sized and tightened.

•All panels must be in place and secured. For Air Tight application, neoprene gasket must be positioned at pre- scribed locations to achieve 2% leakage.

•Tubing must be leak free.

•Unit should be elevated, trapped and pitched to allow for drainage.

•Low voltage wiring is connected.

•Auxiliary drain is installed when necessary and pitched to allow for drainage.

•Drain pan and drain tubing has been leak checked.

Regular Maintenance

HIGH VOLTAGE!

Disconnect ALL power before servicing or installing this unit. Multiple power sources may be present. Failure to do so may cause property damage, personal injury or death.

The only item to be maintained on a regular basis by the user is the circulating air filter(s). Filter should be cleaned or re- placed regularly. A certified service technician must perform all other services.

NOTE: DO NOT USE THESE DIAGRAMS FOR AEPF MODELS. SEE INSTALLATION AND OPERATING INSTRUCTIONS SPECIFICALLY FOR AEPF MODELS.

Model	Motor	CFM deliverd against External Static Pressure
	Speed Tap
		0.1"	0.2"	0.3"	0.4"	0.5"
	1	700	670	650	595	510
	2	820	785	765	745	705
ASPF183016	3	920	900	850	840	815
	4	1075	1055	1015	975	960
	5	1130	1115	1085	1040	1000
	1	1060	865	600	515	420
	2	1105	910	795	745	690
ASPF303616	3	1165	1070	1020	960	915
	4	1285	1240	1195	1140	1100
	5	1435	1395	1350	1315	1265
	1	1060	865	600	515	420
	2	1105	910	795	745	690
ASPF313716	3	1165	1070	1020	960	915
	4	1285	1240	1195	1140	1100
	5	1435	1395	1350	1315	1265
	1	1445	1275	1175	940	855
	2	1545	1405	1325	1260	1145
ASPF426016	3	1660	1610	1555	1490	1415
	4	1905	1870	1810	1750	1695
	5	2115	2070	2000	1965	1915

Table 13

11