Product Specifications
Unit Clearances
Maintain an adequate clearance around the unit for safety, service, maintenance, and proper unit operation. Leave a total clearance of 75” on the main control panel side of the unit for possible removal of fan shaft, coil, electric heat, and gas furnace. Leave a clearance
of 48” on all other sides of the unit for possible compressor removal or service access, and to ensure proper ventilation and condenser airflow. Do not install
the unit beneath any obstruction. Install the unit away from all building exhausts
to inhibit ingestion of exhaust air into the unit’s
Electrical Entrance Locations
(Remove Plug)
12⅜”
30¼”
3½” Dia.
Power Thru
the Curb
4½”
47½”
7½”
26 | www.goodmanmfg.com |