Audio Setup
Digital Audio Output [DVD]
The digital audio output jack (labeled “Coaxial”) is used to output the audio signal recorded on DVD discs to an external amplifi er/receiver. The player provides three options for this audio signal:
•SPDIF/PCM - Select if you are using a
•SPDIF/RAW - Select if you are using a Dolby Digital 5.1 or DTS capable amplifi er.
•Off - Select if you are not using the Coaxial audio output.
1Press Setup in Stop mode.
2Press / to select “Audio Setup”, then press
/Select
3Press / to select “Digital Out”, then press
/Select
Audio Setup
Digital Out | SPDIF/PCM |
SPDIF/RAW
Off
Move 
Select SETUP: Quit
4Press / to select your preferred Digital Out setting.
5 Press 
/Select
WARNING:
•Do not set “Digital Out” to “SPDIF/RAW” unless you are connecting the player to an A/V amplifi er/receiver with Dolby Digital
•High volume sound may damage your hearing as well as the speakers.
To return to the Setup menu
Press
To exit the Setup menu
Press Setup or select “Exit Setup” on the Setup Menu screen.
22
