25
8 - Edit
AUDIO/VIDEO DUBBING
1INSERT TAPE
Insert the tape you wish to dub in Deck 2.
2POSITION TAPE
Play the tape to the point where you
want to begin dubbing and press STILL/
F.ADV.
3ACTIVATE A/V DUB MODE
Audio Dub
To record new audio over existing video
(e.g., to add a narrative), press AUDIO
DUB.
Video Dub
To record new video over existing audio
(e.g. to make a music video), press
VIDEO DUB.
A/V Dub
To record both new audio and video
over existing tape, press AUDIO DUB
and then VIDEO DUB.
Follow these steps to dub new audio and/or video
tracks over your prerecorded tapes.
NOTE
•A/V Dub Auto Stop - A/V Dub will automatically stop recording at tape counter position 0:00:00. This is
helpful when dubbing long segments. Before you set the beginning point on your target tape (Step 2),
fast-forward to the last frame of the segment and press CLEAR to reset the counter to 0:00:00. Then
rewind to the beginning of the segment and start the A/V Dub. When the tape reaches 0:00:00, dubbing
will stop automatically.
Line 2
To dub from the microphone or a device
connected to the rear line 2 input. If you
have connected BOTH a microphone
AND another source device to the rear
A/V inputs, the Dual-Deck VCR will ONLY
recognize the microphone as Line 2.
Tuner
To dub from the currently selected
television channel.
Deck 1
To dub from a tape in Deck 1.
5CUE SOURCE
Position your source device at the point
you wish to begin dubbing; e.g., cue
the external CD or tape player to the
desired track, or pause the tape in Deck
1 at the desired starting point.
6START DUBBING
Play your source, then press REC on
Deck 2. The VCR will begin dubbing
from the source to the tape in Deck 2.
“A.Dub•,” “V.Dub•,” or “A/V Dub•”
will appear on the on-screen display
while dubbing is in progress.
7OPTIONS WHILE DUBBING
•To pause, press STILL/F.ADV on
Deck 2. While the tape is paused,
you can change or reposition the
source device.
•To resume, press REC.
•To stop, press STOP .
•To have the A/V Dub stop automati-
cally, see “A/V Dub Auto Stop”
below.
8TO LISTEN TO DUBBED AUDIO
Dubbed audio is recorded on the tape’s
linear (mono) track. To hear the new
soundtrack, turn off Hi-Fi audio for the
desired playback deck, see page 13.
REC
SP/SLP CLK/CTR CLEAR DISPLAY
STILL/
F.ADV
R
E
V
F
W
D
AUDIO DUB VIDEO DUB
4SWITCH TV VIEW TO SOURCE
Press TV VIEW repeatedly until you view
the source from which you plan to dub
the new audio and/or video track(s):
Line 1
To dub from a device connected to the
front A/V input.