26 Dual-Deck VCR User’s Guide
press
press
press
COPY SETTINGS
1 Comm. Free Copy On
2 EZ Copy Off
3 Speed Matching On
4 Copy Audio Insert Off
5 Copy Mode Auto
/ = Move = Sel MENU = Quit
MENU
1 Copy Settings
2 Playback Settings
3 Record/Edit Settings
4 Channel Settings
5 VCR Settings
6Timer Recording
7 Language/Langue
/ = Move = Sel MENU = Quit
1
4
for Copy Audio Inse
rt
MAIN MENU
COPY AUDIO INSERT
1OPEN MAIN MENU
Press MENU.
2SELECT “COPY SETTINGS”
Press 1.
3SET COPY AUDIO INSERT
Press 4 to choose from the following:
L1 (Line 1)
While copying, a new linear audio track will
be recorded from an external audio source
connected to the front audio jacks.
L2 (Line 2)
While copying, a new linear audio track will
be recorded from an external audio source
connected to the rear audio jacks.
Mic (Microphone)
While copying, a new linear audio track will
be recorded from a microphone connected
to the rear Mic jack.
Off
Copy Audio Insert is disabled. The existing
audio will be copied.
4CONNECT AUDIO SOURCE
Connect your external audio source to the
front (Line 1) or rear (Line 2) inputs using
standard RCA audio cables.
5CUE TAPES
Cue up all devices:
•Source tape in Deck 1.
•Target tape in Deck 2.
•The external audio source (tape player,
CD player, etc.) connected to Line 1 or
Line 2.
6COPY NEW AUDIO TRACK
Press COPY TAPE on the VCR and PLAY on
your external audio source at the same
time.
•The new audio signal will be copied on
the linear audio track. To hear the new
soundtrack, you must turn off Hi-Fi audio
for the desired playback deck, see page
13.
NOTES
•Do not connect speaker outputs to the VCR.
•If there is no audio signal, the audio track will be blank.
•Copy Audio Insert automatically reverts to “Off” when the VCR is turned off.
Follow these steps to insert a new audio track, such as recorded
music or narration, onto your target tape. The new audio can be
recorded from the front line inputs, rear line inputs, or a microphone.