14
Radio Antenna Connections
Connect the supplied FM/AM antennas for listening to
the radio.
11
Connect the AM loop antenna to the AM antenna
connectors.
22
Connector the FM wire antenna to the FM antenna
connectors.
ote
To prevent noise pickup, keep the AM loop antenna
away from the DVD+VCR and other components.
Be sure to fully extend the FM wire antenna.
After connecting the FM wire antenna, keep it as hori-
zontal as possible.
Other Audio/Video (A/V)Connections
Connect the VCR IN LINE1 or LINE2 jacks on the
DVD+VCR to the audio/video out jacks on your
accessory component(s), using optional audio/video
cables.
Digital Device Connections
Connect the DIGITALAUDIO IN (OPTICAL) jack on the
DVD+VCR to the digital audio out (optical) jack on your
digital device (DVD Player, Game device, etc.), using an
optional optical audio cable.
To select the source connected to DIGITAL AUDIO IN,
press AUX on the remote control.
ote
If the audio format of the digital output does not
match the capabilities of your DVD+VCR, the
DVD+VCR will produce a strong, distorted sound or
no sound at all.
The Optical input function is available only when the
external unit’s sampling frequency is 32-48kHz.
Rear of DVD+VCR

AM loop antenna (supplied)

FM wire antenna (supplied)

Rear of DVD+VCR
HDTV ReceiverGame Device
OR
Connections (Continued)
L
R
VIDEO 
OUTPUT
AUDIO 
OUTPUT
Jack panel of Accessory Component
(VCR, Camcorder, etc.)
Rear of DVD+VCR Front of DVD+VCR
OR