48

c. While still pinching the straps together, unbuckle the seat belt. Do not allow the straps to slip.

d. Connect the lap belt to the shoulder belt by placing the locking clip on the belts about ½ inch from the buckle tongue as shown Ê.

e. Re-buckle the belt and pull hard on the lap belt to be sure it does not move.

Ê

½

inch

f. Repeat this procedure if the lap belt is loose or lengthens when pulled.

13. If you are using the base, make sure that

Ë

there is nothing on top of or in the base that

may interfere with attachment of the safety seat.

 

Then push the safety seat down into the base

 

and make sure that you hear a “click” Ë.

 

Pull up on the safety seat to be sure it is latched

 

securely into the base.

 

If the safety seat does not securely latch into the base, the safety seat provides NO protection for your child. DO NOT use the safety seat/base if the safety seat does not securely latch into the base.

Page 52
Image 52
Graco 13785-7-00 manual