56

Models with 3-Point Harness

To wash the safety seat pad:

1.From the back of the safety seat, loosen and remove the harness strap from the harness tightener. From the front of the safety seat, pull the harness strap through the slot.

2.From the back of the safety seat, push a corner of the harness anchor buckle back into

its harness slot Ê. From the front of the safety seat, use the harness strap to pull the buckle through the slot.

Harness anchor buckle Ê

Harness tightener

3.Carefully remove the seat pad. DO NOT USE SAFETY SEAT without the seat pad.

4.Machine wash on delicate cycle and drip-dry. DO NOT USE BLEACH.

5.Fold harness straps through the buckle hole in the safety seat pad. Then fit pad into position.

6.See section 6, “Inserting the Harness Straps in the Proper Slots”

(page 30) to properly secure the harness straps back on the safety seat.