3.Behind the seat, push both shoulder straps under the owner’s manual pocket and out the other side Ì. Reassemble the strap ends onto the metal junction plate. The strap on your left must go on first, then the strap on your right.
Check that the straps are completely within the junction plate loop, as shown Í, otherwise the straps could slip out.
4.Inspect the harness straps from the front and back of the safety seat to be sure they are not twisted. Twisted belts can create slack in the harness straps and reduce the protection provided by the safety seat.
5.Pull on the harness straps from the front of the safety seat to be sure the straps are secure.
Ì
Í
35
