Graco 225 important safety instructions Installation

16-Gallon (60 Liter) Drum Cover Pump

Fire-Ball 225 Model 246904

Fire-Ball 300 Model 225094

1.Set the cover (4) on a 16-gallon (60 liter) drum and secure with the thumbscrews (Q). See FIG. 5.

2.For 246904 cut the extension tube (P) at a 45° angle to a length appropriate for the size of the drum. When installed, the bottom of the angle should be about 1” (25 mm) from the bottom of the drum. The down tube for 225094 is sized for the container.

3.Install the pump (F) on the cover (4) with the screws (R), washers and nuts (S) supplied.

Installation

4.Assemble the air regulator kit (items 3a-3d) to the pump air inlet (D) as shown. Use thread sealant and tighten all parts securely.

5.Apply thread sealant to the male threads of the 3/8 npt swivel union (2d). Screw the union into the bleed-type master air valve (3c).

6.Apply thread sealant to the male threads of the 1/2 npt swivel union (2b). Screw the union into the pump fluid outlet (N).

7.Connect the 1/2 npt(mbe) fluid hose (2a) to the swivel union (2b).

8.Connect the 3/8 npt(mbe) air hose (2c) to the swivel union (2d).

	F
	3d
3b	R
	D

N 2b

3d A

3c

2a

2d

3a

P

2c

S

4

Q

FIG. 5

10 Installation and Operation