Initial Setup, Shipping Damage, Oil, Fuel, Pump plug | Graco 2626LD

Initial Setup

Shipping Damage

Check pressure washer for shipping damage. Notify carrier immediately if there is any damage.

Oil

Engine is shipped without engine oil. Add Graco SAE 10W–30 engine oil (included) and confirm oil level is within an acceptable range according to the Honda Owner’s Manual (included).

(cold)

ti5952a

Fuel

Fill fuel tank.

ti5953a

Pump plug

Remove red water pump plug (A) and replace with attached black vented pump plug (B).

Red water pump plug

Black vented pump plug

TI10675A

309828 5

Image 5

Graco 2626LD, 2525LD, 246601, 249065 important safety instructions Initial Setup, Shipping Damage, Oil, Fuel, Pump plug

Contents

2626LD 2525LD Table of Contents Fuel Hazard Component Identification Shipping Damage Initial SetupOil Fuel Install Spray Tip InstallationConnect High-Pressure Hose and Gun Connect to Water Supply Pressure Relief Operation For Model 2525LD only , move Safety on Safety OFF Chemical Injector Operation Follow Pressure Relief Procedure, Perform Pressure Relief Procedure, Installing and Changing Spray Tips Shutdown, Flushing, and Storage Ti3231a Storage Location Long Term more than 30 days/Winter StoragePump Perform Pressure Relief Procedure Interval What to do Maintenance Chart Perform Pressure Relief Procedure Problem Cause Solution Troubleshooting Changing Spray Tips Problem Cause SolutionPrematurely Servicing Valves Pump Service Packings Model 2525LD Parts Part Description Qty Model 2525LD Part Description Qty SJV2.5G25D-F7 Repair Kits Repair KitsSJV2.5G25D-F7 Model 2626LD Model 2626LD Part Description Qty SJV2.5G27-D2105 Repair Kits SJV2.5G27-D105 Model 2626LD Technical DataModel 2525LD Toll Free Graco Standard Warranty