FUEL HAZARD:

Fuel is combustible. When spilled on a hot surface it can ignite and cause a fire. Do not fill fuel tank while engine is running or hot.

EXHAUST HAZARD:

Exhaust contains poisonous carbon monoxide, which is colorless and odorless. Do not operate this equipment in a closed building.

EQUIPMENT MISUSE HAZARD:

Misuse of pressure washer or accessories can cause the equipment to rupture or malfunction and result in serious injury.

DDo not alter or modify any part or factory–setting

DCheck equipment daily. Repair or replace worn or damaged parts immediately.

DDo not exceed maximum working pressure (MWPR) of the lowest–rated system component

DUse fluids and solvents that are compatible with the equipment wetted parts. See Specifications page for this information.

DWear hearing protection when operating this equipment.

DDo not “blow back” fluid; this is not an air spray system

DFollow Pressure Relief, page 7 before cleaning, checking or servicing equipment.

TOXIC FLUID HAZARD:

Hazardous fluid or toxi fumes can cause serious injury or death if splashed in eyes or on skin, inhaled, or swallowed.

DKnow specific hazards of fluids you are using and take protective measures as recommended by the fluid and solvent manufacturer.

SKIN INJECTION HAZARD:

Spray from gun, leaks or ruptured components can inject fluid into your body and cause serious injury. Fluid splashed in eyes or on skin can also cause serious injury.

DFluid injected into skin might look like just a cut, but it is a serious injury. Get immediate surgical treatment.

DDo not point gun at anyone or any part of the body.

DDo not stop or deflect leaks with hand, body, glove, or rag.

DDo not put your hand or fingers over the spray tip.

DTIghten fluid connections before you start this equipment.

DEngage the gun safety whenever you stop spraying.

DFollow Pressure Relief Procedure, page 7 if the spray tip clogs and before you clean, check or service this equipment.

DRepair or replace worn or damaged parts immediately.

DCheck hoses, tubes, and couplings daily. Do not repair high–pressure couplings. Replace entire hose. Fluid hoses must have spring guards on both ends to prevent kinks and rupture.

309828 3

Page 3
Image 3
Graco 249065, 2525LD, 2626LD, 246601 important safety instructions Fuel Hazard