Manuals / Graco / Lawn and Garden / Pressure Washer

Graco 249065, 2525LD, 2626LD, 246601 Pressure Relief, Engage trigger safety latch, 309828

Models: 249065 246601 2626LD 2525LD

1 28

Download 28 pages 10.4 Kb

Page 7

Image 7

PRESSURE RELIEF

Follow these instructions whenever you are instructed to relieve pressure, stop spraying for

more than 10 minutes, check or service the equipment, or install or clean the spray nozzle.

1. Engage trigger safety latch

TI3233A

2. Turn pressure washer off

3. Remove ignition cable from spark plug.

4. Shut off water supply. Disconnect from water.

5.Disengage trigger safety latch. Trigger gun to relieve pressure. Then re–engage the safety latch.

TI3234a

Note: If you suspect that the spray tip or hose is clogged or that pressure has not been fully relieved after following the steps above, disengage the trigger safety latch and trigger the gun to relieve pressure.

309828 7

Page 7

Image 7

Graco 249065, 2525LD, 2626LD, 246601 important safety instructions Pressure Relief, Engage trigger safety latch, 309828

Contents

G-Force Direct-Drive Pressure Washer Important Safety InstructionsINSTRUCTIONS 309828NWarning Symbol Table of ContentsCaution Symbol TOXIC FLUID HAZARD FUEL HAZARDEXHAUST HAZARD EQUIPMENT MISUSE HAZARDComponent Identification Pump plug Initial SetupShipping Damage FuelConnect to Water Supply InstallationInstall Spray Tip Connect High-Pressure Hose and Gun1. Engage trigger safety latch PRESSURE RELIEF309828 Startup Operation5. Be sure spark plug ignition cable is pushed firmly onto spark plug 6. For Model 2525LD ONLY , move309828 Safety OFF Trigger Safety LatchAlways engage the safety latch when you stop spraying Safety ONti3237b 1. Follow Pressure Relief Procedure, pageChemical Injector Operation 3098281. Perform Pressure Relief Procedure, page Installing and Changing Spray Tips1. Remove chemical injector hose from pump, if attached Shutdown, Flushing, and Storage3. Engage trigger safety For model 2626LD, turn OFF power switchTI3234a 6. Remove trigger safety latch and trigger gun to relieve pressure5. Shut off water supply. Disconnect water supply hose from pump ti3231aStorage Location Long Term more than 30 days/Winter StorageENGINE PumpWhat to do Maintenance ChartPerform Pressure Relief Procedure page IntervalTroubleshooting ProblemSolution CauseSolution prematurelyChanging Spray Tips page ProblemInlet Valves Disassembly Pump ServiceDischarge Valves Disassembly AssemblyPackings DisassemblyAssembly 43,44 PartsModel 2525LD 309828Model 2525LD PartDescription PartsSJV2.5G25D-F7 Repair Kits Repair KitsSJV2.5G25D-F7 Use with model 2525LDParts Model 2626LDti7344a Description PartsModel 2626LD PartRepair Kits SJV2.5G27-D105Use with Model 2626LD SJV2.5G27-D2105 Repair Kits309828 Technical DataModel 2525LD Model 2626LDFOR GRACO CANADA CUSTOMERS Graco Standard WarrantyADDITIONAL WARRANTY COVERAGE Graco Phone Number