Contents
Part No. 245187, 331, Series B
Instructions
Part No. 253697, 281, Series A
Part No. 245185, Series B 240 Volt Heater
Symbols
Table of Contents
Warning Symbol
Caution Symbol
MOVING PARTS HAZARD
SKIN INJECTION HAZARD
cal treatment
307932
TOXIC FLUID HAZARD
FIRE AND EXPLOSION HAZARD
General Information
Installation
Grounding
6. Fluid supply container follow your local code
Supplied Components
System Accessories
Installation
Air Line Accessories
Model 245187 Shown
Installation
J H
307932
Installation
Models 245187 and 253697 for Ambient Temperature Spray Applications
Model 245187 Shown
Installation
Models 245185 and 245186 for Heated Temperature Spray Applications
NOTE Refer to the Mounting Hole Layout on page
307932
Installing Dual Heater Mounting Kit
Accessories for a Heated System
Converting to a Heated System
Installation
10. Install the warning label 51 as shown in Fig
Installation
exceed 90 psi 6 bar, 600 kPa incoming air pres- sure to the pump
307932
Installation
Installing Circulating Kit
exceed 90 psi 6 bar, 600 kPa incoming air pres- sure to the pump
307932
Installation
4 Connect to the main fluid supply line to the guns
Part of the heater
Pressure Relief Procedure
Operation/Maintenance
Packing Nut/Wet-Cup
Flush the Pump Before First Use
Heated Circulating Systems
Starting and Adjusting the Pump
Operation/Maintenance
NOTE Do not install the spray tip yet
Flushing
Shutdown and Care of the Pump
Operation/Maintenance
Model 245187, 331, Series B Model 253697, 281, Series A
Parts
307932
Description
Model 245186, Series A 480 Volt Heater
Model 245185, Series A 240 Volt Heater
Y Replacement Danger and Warning labels, tags and cards
Parts
Model 245185, Series A 240 Volt Heater
Parts
Model 245186, Series A 480 Volt Heater
307932
12.375 in
Mounting Hole Layout
6 in
314 mm
Sound Power Levels
Technical Data
Sound Pressure Levels
tested at 1 meter from motor
Graco Information
Graco Standard Warranty
FOR GRACO CANADA CUSTOMERS
Graco reserves the right to make changes at any time without notice