Manuals / Graco / Household Appliance / Water Pump

Graco 307932R, 253697 important safety instructions Instructions, Part No. 245187, 331, Series B

Models: 253697 307932R 245185 245186 245187

1 22

Download 22 pages 42.4 Kb

Page 1

Image 1

Instructions

Parts

28:1/33:1 RATIO, WALL MOUNT
Bulldogr Pumps	307932R

For ambient temperature spray applications.

Part No. 245187, 33:1, Series B

3300 psi (22.8 MPa, 228 bar) Maximum Fluid Working Pressure 100 psi (700 kPa, 7 bar) Maximum Air Input Pressure

Part No. 253697, 28:1, Series A

2800 psi (19.3 MPa, 193 bar) Maximum Fluid Working Pressure 100 psi (700 kPa, 7 bar) Maximum Air Input Pressure

Part No. 245185, Series B (240 Volt Heater)

Part No. 245186, Series B (480 Volt Heater)

For heated spray applications.

3000 psi (20.7 MPa, 207 bar) Maximum Fluid Working Pressure

90 psi (600 kPa, 6 bar) Maximum Air Input Pressure

Important Safety Instructions

Read all warnings and instructions in this manual.

Save these instructions.

See page 2 for Table of Contents.

4414B

Model 245187 Shown

GRACO INC. P.O. BOX 1441 MINNEAPOLIS, MN 55440–1441

Page 1

Image 1

Graco 307932R important safety instructions Instructions, Part No. 245187, 331, Series B, Part No. 253697, 281, Series A

Contents

Part No. 245187, 331, Series B InstructionsPart No. 253697, 281, Series A Part No. 245185, Series B 240 Volt HeaterSymbols Table of ContentsWarning Symbol Caution SymbolMOVING PARTS HAZARD SKIN INJECTION HAZARDcal treatment 307932TOXIC FLUID HAZARD FIRE AND EXPLOSION HAZARDGeneral Information InstallationGrounding 6. Fluid supply container follow your local codeSupplied Components System AccessoriesInstallation Air Line AccessoriesModel 245187 Shown InstallationJ H 307932Installation Models 245187 and 253697 for Ambient Temperature Spray ApplicationsModel 245187 Shown Installation Models 245185 and 245186 for Heated Temperature Spray ApplicationsNOTE Refer to the Mounting Hole Layout on page 307932Installing Dual Heater Mounting Kit Accessories for a Heated SystemConverting to a Heated System Installation10. Install the warning label 51 as shown in Fig Installationexceed 90 psi 6 bar, 600 kPa incoming air pres- sure to the pump 307932Installation Installing Circulating Kitexceed 90 psi 6 bar, 600 kPa incoming air pres- sure to the pump 307932 Installation4 Connect to the main fluid supply line to the guns Part of the heaterPressure Relief Procedure Operation/MaintenancePacking Nut/Wet-Cup Flush the Pump Before First UseHeated Circulating Systems Starting and Adjusting the PumpOperation/Maintenance NOTE Do not install the spray tip yetFlushing Shutdown and Care of the PumpOperation/Maintenance Model 245187, 331, Series B Model 253697, 281, Series A Parts307932 DescriptionModel 245186, Series A 480 Volt Heater Model 245185, Series A 240 Volt HeaterY Replacement Danger and Warning labels, tags and cards PartsModel 245185, Series A 240 Volt Heater PartsModel 245186, Series A 480 Volt Heater 30793212.375 in Mounting Hole Layout6 in 314 mmSound Power Levels Technical DataSound Pressure Levels tested at 1 meter from motorGraco Information Graco Standard WarrantyFOR GRACO CANADA CUSTOMERS Graco reserves the right to make changes at any time without notice

Instructions

28:1/33:1 RATIO, WALL MOUNT

Bulldogr Pumps

307932R

Part No. 245187, 33:1, Series B

Part No. 253697, 28:1, Series A

Part No. 245185, Series B (240 Volt Heater)

Part No. 245186, Series B (480 Volt Heater)