Contents
Instructions
Part No. 245187, 331, Series B
Part No. 253697, 281, Series A
Part No. 245185, Series B 240 Volt Heater
Table of Contents
Symbols
Warning Symbol
Caution Symbol
SKIN INJECTION HAZARD
MOVING PARTS HAZARD
cal treatment
307932
FIRE AND EXPLOSION HAZARD
TOXIC FLUID HAZARD
Installation
General Information
Grounding
6. Fluid supply container follow your local code
System Accessories
Supplied Components
Installation
Air Line Accessories
Installation
Model 245187 Shown
J H
307932
Model 245187 Shown
Models 245187 and 253697 for Ambient Temperature Spray Applications
Installation
Models 245185 and 245186 for Heated Temperature Spray Applications
Installation
NOTE Refer to the Mounting Hole Layout on page
307932
Accessories for a Heated System
Installing Dual Heater Mounting Kit
Converting to a Heated System
Installation
Installation
10. Install the warning label 51 as shown in Fig
exceed 90 psi 6 bar, 600 kPa incoming air pres- sure to the pump
307932
exceed 90 psi 6 bar, 600 kPa incoming air pres- sure to the pump
Installing Circulating Kit
Installation
Installation
307932
4 Connect to the main fluid supply line to the guns
Part of the heater
Operation/Maintenance
Pressure Relief Procedure
Packing Nut/Wet-Cup
Flush the Pump Before First Use
Starting and Adjusting the Pump
Heated Circulating Systems
Operation/Maintenance
NOTE Do not install the spray tip yet
Operation/Maintenance
Shutdown and Care of the Pump
Flushing
Parts
Model 245187, 331, Series B Model 253697, 281, Series A
307932
Description
Model 245185, Series A 240 Volt Heater
Model 245186, Series A 480 Volt Heater
Y Replacement Danger and Warning labels, tags and cards
Parts
Parts
Model 245185, Series A 240 Volt Heater
Model 245186, Series A 480 Volt Heater
307932
Mounting Hole Layout
12.375 in
6 in
314 mm
Technical Data
Sound Power Levels
Sound Pressure Levels
tested at 1 meter from motor
Graco Standard Warranty
Graco Information
FOR GRACO CANADA CUSTOMERS
Graco reserves the right to make changes at any time without notice