General Information
General Information
• Reference numbers and letters in parentheses
in the text refer to numbers and lettersin the
illustrations.
• Be sure all accessories are adequately sizedand
pressure-rated to meet system requirements.
• To protect the screens from paints andsolvents,
clear-plastic protective shields (10 per pack) are
available. OrderPart No. 197902 forthe Advanced
Display Module. Clean the screens with a dry cloth
if necessary.
Location
To prevent tipping which can cause serious injury
and equipment damage, the mounting stand
must be securely anchored to the floor or to an
appropriate base. The stand is not intended for
free-standing use or wall mounting.
Mounting the PD2K Base Unit:
• Mount the PD2K in a non-hazardouslocation.
• Ensure that the mounting surface and mounting
hardware are strong enough to supportthe weight
of the equipment, fluid, hoses, and stresscaused
during operation.
• Do not mount to a wall.
• Secure the stand to the floor with 1/2 in. (13 mm)
bolts which engage at least 6 in. (152 mm) into
the floor to prevent the unit from tipping. See
Dimensions, page 36.
• There must be sufficient space on all sides of
the equipment for installation, operator access,
maintenance, and air circulation. The fans at the
back of the unit require a minimum of 6 in. (152
mm) clearance from the closest surface to ensure
adequate air circulation.
18 332458B